Design and fabrication of a pumping station operated with 2 Technojet MH40-65 / 7 stages supported by a Mudwizard system of 400 gallons per minute. The pumps operate in automatic mode using a level probe. Pump # 1 is turned on when the tank is full and pump # 2 is acting as a backup when the outflow is less than the inflow. The pumps are assembled with a 125HP 3600RPM engine.
Dewatering system for an open pit mine in Ontario. This project consists of four mobile pumping stations. In each of these units are three sections; the first includes a multi-stage Technojet MH200-250 / 4 700HP pump with a capacity of approximately 600 m3 / h, the second consists of an electrical room with a VFD and the third contains a 25000 kV transformer at 600 V. The stations installed in series allow a dewatering that follows the progress in depth of the mine.
Design, complete kit preparation and installation of two Technojets pumps underground. Pumps have been tested and delivered to mine site. Final underground installation of the two Technojet pumps connected to the mine sump.
High pressure dewatering system with a 400 gallon Mudwizard®, including two pumping stations composed of Technojet MH50-80 / 5 cascade stage pumps installed at two different levels. The system allows clarification of water from mining operations before being pumped by Technojet stations. All components in contact with water are made of stainless steel and plastic to withstand the high sodium chloride content found in this mine. These Mudwizard® systems will treat the drilling water for recirculation.
This system includes:
- 4x Technojet MH50-80 / 5SS 150HP
- 4x water tank made of HDPE
- All stainless steel piping for saltwater application
- A complete Mudwizard® system in PVC and Stainless Steel to treat up to 60GPM.